Multitron - Operating Manual
Accessories
20 August 2020 Page 57 of 158
5 Accessories
In the following section, the available accessories for the device are
described. For special applications, please contact our customer ser-
vice for advice (for contact information, see page 2).
5.1 Trays
Different trays are available for the device; these can be purchased
individually or ordered with the device. In addition to the universal
table tray, which can be equipped as desired, various trays with fixed
features are available for different purposes.
5.1.1 Universal Table Tray
The M tray referred to as “universal table tray” with the dimensions
85 x 47 cm features drill holes on a grid so that it can be fitted as de-
sired. For fitting, various clamps and test tube holders are available,
that can be combined as desired (see chapter 5.2 "
Holders", page 65).
The universal table tray is made of anodised aluminium and can be
sterilised in autoclaves if required.
The separately available Sticky Stuff adhesive matting (8 units of 20 x
20 cm) can also be stuck onto the universal table tray.
Technical Data for the universal table tray
Description Value
Material Aluminium
Size 850 x 470 mm
Weight 4.5 kg
Threaded holes M4
No. of threaded holes 462
Threaded hole grid 28.28 x 28.28 mm
Sterilisation in autoclave YES
To Next Page
Loading...
