Multitron - Operating Manual
Accessories
Page 68 of 158 20 August 2020
5.3 Box for Microtitre Plates
Overview
The box for microtitre plates is used for low-vapour cultivation of mi-
crotitre plates and deep well plates. It protects cultures from drafts in
the incubation chamber and also offers a stable container in which
cultures can be transported.
The box for microtitre plates consists of an aluminium container with
a removable lid into which a replaceable paper filter is integrated. A
microtitre insert with screw-mounted pins is used for mounting mi-
crotitre plates and deep well plates.
For shaking, the box for microtitre plates can be screwed onto a uni-
versal table tray or placed on the Sticky Stuff adhesive matting.
Structure
1 Filter
2 Top plate
3 Microtitre insert
4 Quickload spacers
5 Container
6 Filter washer
Mounting the box for microtitre plates
The box for microtitre plates is mounted on the table by means of
four Phillips-head screws. When delivered, the fastening screws are
covered with plastic cap nuts. These must be removed prior to instal-
lation.
Alternatively, the box for microtitre plates can be plac
Stuff adhesive matting. In this case, all fastening screws must be re-
moved to avoid damaging the adhesive matting.
During installation, ensure that the tray is always loaded evenly.
1
2
3 4
5
6
To Next Page
Loading...
