Multitron - Operating Manual
Operation
20 August 2020 Page 89 of 158
Keys for setting
After tapping the SET
key the parameter setpoints or the duration for
the timer can be entered.
In the according display area the sign
Setpoint
lights up.
With the Plus key the values for the parameters or the time are in-
creased.
By tapping the key once, the value is increased with the smallest in-
crement for the particular parameter. By holding the key, the incre-
ment increases in ever bigger steps.
With the Minus key the values for the parameters or the time are re-
duced.
By tapping the key once, the value is reduced with the smallest incre-
ment for the particular parameter. By holding the key, the increment
increases in ever bigger steps.
The ON/OFF key serves to turn the parameters and timers on or off.
To Next Page
Loading...
