Ingersoll-Rand INSIGHTqc - Page 83

Dual Slope B Low
Limit Pass
Indicates whether or not the Slope
check in region B against the
Slope low limit for region B passed
or failed.
Dual Slope B High
Limit Pass
Indicates whether or not the Slope
check in region B against the
Slope high limit for region B
passed or failed.
Dual Slope A Low
Limit Pass
Indicates whether or not the Slope
check in region A against the
Slope low limit for region A passed
or failed.
Dual Slope A High
Limit Pass
Indicates whether or not the Slope
check in region A against the
Slope high limit for region A
passed or failed.
Unusual Fault
Indicates whether an unusual fault
was reported by the MCE for the
fastening result.
Motor Torque
Constant Test Pass
Indicates the motor torque
constant test result.
Free Speed Test
Pass
Indicates whether or not the free
speed check passed or failed.
Angle Low Pass
Indicates whether or not the angle
check against the angle low limit
passed or failed.
Angle High Pass
Indicates whether or not the angle
check against the angle high limit
passed or failed.
Torque Low Pass
Indicates whether or not the torque
check against the torque low limit
passed or failed.
Torque High Pass
Indicates whether or not the torque
check against the torque high limit
passed or failed.
Peak Prevailing
Torque
Maximum achieved value of
torque in prevailing fastening