Inner Range CONCEPT IQ Installation And Programming Manual

p2 Section 0. Title. Version 1.02 CONCEPT IQ. Installation & Programming Manual.
SECTION TITLE CURRENT VERSION
-AS AT 16 JAN 2002
0 Title and Document Version log (This sheet) 1.02
1 Installation Manual 1.01
2 Programming Introduction 1.01
3 General Options 1.01
4 Times 1.01
5 Areas 1.01
6 Zone Inputs 1.01
7 System Inputs 1.02
8 Auxiliary Outputs 1.01
9 Terminals 1.02
10 Communications 1.01
11 Users 1.01
12 System Planning & Programming record sheets 1.02
13 Index 1.02
Document Revisions
This table shows the current Version numbers of all documents in the “Concept IQ Installation and Programming Manual”.
This table can be used when checking the Website for updates. http://www.innerrange.com
When you replace any documents in this manual with new Versions, ensure that this table is updated or replaced with the
latest Version from the Website.
Inner Range Pty Ltd is proud of the reputation it has gained in the provision of high quality electronic products. Exhaustive
factory and field testing ensure that enhanced system programming features and additional hardware components operate
as expected prior to their release to our customers. Extensive function testing is carried out on every Inner Range Concept
product prior to it leaving the factory.
It is our intention to completely satisfy the requirements of our customers. To that end, Inner Range Pty Ltd stands behind
its products with confidence. A Two Year Warranty accompanies every Inner Range Concept product. Should any
Concept product fail to function as intended by the manufacturer within this period, it should be returned to the distributor
and the fault or symptom detailed. Inner Range will, at its own discretion, repair or replace the product as soon as possible.
This Warranty does not cover product failures occurring wholly or in part as a result of misuse, malicious damage,
accidental damage or acts of nature.
1) The manufacturer and/or it’s agents take no responsibility for any damage, financial loss or injury caused to any
equipment, property or persons resulting from the correct or incorrect use of the Concept IQ system and its
peripherals. The purchaser assumes all responsibility in the use of the Concept system and its peripherals.
2) Whilst every effort has been made to ensure the accuracy of this manual, Inner Range Pty Ltd assumes no
responsibility or liability for any errors or omissions. Due to ongoing development the contents of this manual is
subject to change without notice. Check regularly with your supplier or the Website for updates.
Disclaimer
Warranty

Inner Range CONCEPT IQ Specifications

General

Brand	Inner Range
Model	CONCEPT IQ
Category	Security System
Language	English