Intel® Server Board S1200V3RP TPS BIOS Setup Interface
Revision 1.2
Help Text:
Enable or Disable Serial port B.
Comments: Serial Port B can be used for Serial Console Redirection.
Back to [Serial Port Configuration Screen] — [Screen Map]
5. Address
Option Values: 3F8h
2F8h
3E8h
2E8h
Help Text:
Select Serial port B base I/O address.
Comments: Legacy I/O port address.
Back to [Serial Port Configuration Screen] — [Screen Map]
6. IRQ
Option Values: 3
4
Help Text:
Select Serial port B interrupt request (IRQ) line.
Comments: Legacy IRQ
Back to [Serial Port Configuration Screen] — [Screen Map]
9.4.2.10 USB Configuration
The USB Configuration screen allows the user to configure the available USB controller options.
To access this screen from the Main screen, select Advanced > USB Configuration. To move to
another screen, press the <Esc> key to return to the Advanced screen, then select the desired
screen.
This screen should display all USB Mass Storage devices which have been detected in the
system. These include USB-attached Hard Disk Drives (HDDs), Floppy Disk Drives (FDDs),
CDROM and DVDROM drives, and USB Flash Memory devices (USB Key, Keyfob, etc).
To Next Page
Loading...
Need help?
General
