BIOS Setup Interface Intel® Server Board S1200V3RP TPS
Revision 1.2
1. Network Device #1
2. Network Device #2
Option Values: <Available Network Devices>
Help Text:
Set system boot order by selecting the boot option for this position.
Comments: Choose the order of booting among Network Devices by choosing
which available Network Device should be in each position in the order.
Back to [Network Device Order Screen] — [Boot Options Screen] — [Screen Map]
9.4.2.23 BEV Device Order
The BEV Device Order screen allows the user to control the order in which BIOS attempts to
boot from the BEV Devices installed in the system. This screen is only available when there is at
least one BEV device available in the system configuration.
To access this screen from the Main screen, select Boot Options > BEV Device Order. To move
to another screen, press the <Esc> key to return to the Boot Options screen, then select the
desired screen.
Figure 41. BEV Device Order Screen
Screen Field Descriptions:
1. BEV Device #1
2. BEV Device #2
Option Values: <Available BEV Devices>
Help Text:
Set system boot order by selecting the boot option for this position.
Comments: Choose the order of booting among BEV Devices by choosing
which available BEV Device should be in each position in the order.
Back to [BEV Device Order Screen] — [Boot Options Screen] — [Screen Map]
To Next Page
Loading...
Need help?
General
