Intel® Server Board S1200V3RP TPS BIOS Setup Interface
Revision 1.2
Figure 36. Boot Option Screen
Screen Field Descriptions:
1. System Boot Timeout
Option Values: [Entry Field 0 – 65535, 0 is default]
Help Text:
The number of seconds BIOS will pause at the end of POST to allow the user to press
the [F2] key for entering the BIOS Setup utility.
Valid values are 0-65535. Zero is the default. A value of 65535 causes the system to go
to the Boot Manager menu and wait for user input for every system boot.
Comments: After entering the desired timeout, press the <Enter> key to
register that timeout value to the system. These settings are in seconds. The timeout
value entered will take effect on the next boot.
To Next Page
Loading...
