Intel S1200V3RP Technical Product Specification

BIOS Setup Interface Intel® Server Board S1200V3RP TPS
Revision 1.2
184
To access this screen from the Main screen, select Boot Options > Hard Disk Order. To move to
another screen, press the <Esc> key to return to the Boot Options screen, then select the
desired screen.
Figure 38. Hard Disk Order Screen
Screen Field Descriptions:
1. Hard Disk #1
2. Hard Disk #2
Option Values: <Available Hard Disk devices>
Help Text:
Set system boot order by selecting the boot option for this position.
Comments: Choose the order of booting among Hard Disk devices by
choosing which available Hard Disk device should be in each position in the order.
Back to [Hard Disk Order Screen] — [Boot Options Screen] — [Screen Map]
9.4.2.21 Floppy Order
The Floppy Order screen allows the user to control the order in which BIOS attempts to boot
from the Floppy Disk drives installed in the system. This screen is only available when there is
at least one Floppy Disk (diskette) device available in the system configuration. Note that a USB
attached diskette drive or a USB Key device formatted as a diskette drive will appear in this
section.
To access this screen from the Main screen, select Boot Options > Floppy Order. To move to
another screen, press the <Esc> key to return to the Boot Options screen, then select the
desired screen.

Intel S1200V3RP Specifications

General

Brand	Intel
Model	S1200V3RP
Category	Server Board
Language	English