Intel S1200V3RP - Page 46

Functional Architecture Intel® Server Board S1200V3RP TPS
Revision 1.2
32
3.5.3.2 Integrated BMC Embedded LAN Channel
The Integrated BMC hardware includes two dedicated 10/100 network interfaces. These
interfaces are not shared with the host system. At any time, only one dedicated interface may
be enabled for management traffic. The default active interface is the NIC 1 port.
For these channels, support can be enabled for IPMI-over-LAN and DHCP. For security reasons,
embedded LAN channels have the following default settings:
 IP Address: Static
 All users disabled