134 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
7.4.n.3 Stop date
Enter the last day of the exception in DD.MM format.
7.4.n.4 Year
Enter the year of the selected exception. The allowed range is 2000 to 2099.
Value below 2000 is equal to All.
7.4.n.5 Week days
Define if the exception is valid for particular days of the week.
7.4.n.6 Substitute
If the Substitute option is set to On, only actions and action lists assigned to this
exception are performed during the exception time. If the option is set to Off, the
exception actions are executed together with the other actions that must occur at
the configured time.
7.4.n.7 Active
The Exception activation menu allows you to disable or enable the exception
permanently.
7.4.n.8 Actions
Choose previously configured actions to configure the exception.
An exception can contain up to 4 actions.
Choose “Action” to select an action.
Choose “Remove” to remove an action from the exception.
7.4.n.9 Action lists
Choose previously configured action lists to configure the exception.
To Next Page
Loading...
