188 Advisor Advanced ATSx000A(-IP) Installation and Programming Manual
PC connections
9.4 PC connection
A PC connection can be used for:
• Upload / download (U/D)
• Management
• Remote control
The PC connection menu allows you to set up the PC connection parameters.
9.4.1 Connections
0>Add PC conn
1 PC conn 1
It is possible to define up to 16 different PC connections.
9.4.1.0 Add PC connection
Access the menu to add a PC connection. If the PC connection is created
successfully, the following message appears:
The new PC connection is given the default name “PC conn N” and placed on
the end of the PC connection list. You can now start editing the PC connection
details for the new PC connection.
9.4.1.n Select PC connection
Select the connection to configure.
Note: Particular options in this menu differ for specific transmission paths. For
specific options, see:
• “PSTN specific options” on page 190
• “IP and GSM/GPRS specific options” on page 191
• “GSM specific options” on page 192
Common options
9.4.1.n.1 Name
The connection name can consist of up to 16 characters.
To Next Page
Loading...
Need help?
General
