Appendix C: KTD-405 keypad
132 TruVision DVR 11 and DVR 11c User Manual
Task Keypad action Further information
Select a character or menu
option
Press Enter ( ). Note. If you press esc before
pressing Enter, you quit the
menu without saving any
changes. It is the same as
Cancel.
Select the zone ID Press zone to connect the
keypad to the DVR.
Live view mode
Call up a single camera Press 0 to 9 and then press
Enter ( ).
Using the numeric buttons 0 to 9,
enter the number of the camera
and then press Enter ( ).
Call up multiview windows Press view and then press
button 5 to scroll through
the next available multiview
screen.
Sequence through cameras Press the seq button to
scroll through the cameras
in full screen.
Sequence through multiview
windows
Move the joystick to the
right (= next camera), or the
left (=previous camera).
Switch between monitor A
and monitor B
Press the mon button and
button 1 to switch to
monitor A.
Press the mon button and
button 2 to switch to
monitor B.
Manually acknowledge an
alarm
Press Alarm.
PTZ functions
Enter PTZ mode In live view mode, press
Enter ( ).
It is possible that you first need
to loin before you can access the
PTZ mode.
PTZ functions (Up, Down,
Left, Right, Zoom in, Zoom
out)
Move the joystick to move
the dome up, down, left and
right
Press zoom+ and zoom-.
KTD-405U: Turn the knob on the
joystick to zoom in/zoom out.
KTD-405-2DU: Press the zoom+
and zoom- buttons.
Leave PTZ mode Press esc.
Playback functions
Search for recorded video
Press .
Once password is entered, the
Advanced Search menu
appears.
All-day playback Press when in full
screen.
All-day playback of the currently
selected camera.
To Next Page
Loading...
