Intermec EasyCoder C4 - UDC Memory Cartridge Information

98 Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual
Chapter 7—Commands
UDC – Memory Cartridge Information
Description This command checks an inserted memory cartridge and returns
information on its content on the RS-232 or USB channel.
Syntax UDC
Remarks The command checks the memory cartridge for the following
information and returns one of the following alternatives:
NA ↵ Cartridge not detected.
000 ↵ Cartridge detected but no relevant information is
found.
001-004 ↵ Cartridge detected. Followed by one to four lines
of information on detected fi rmware and/or Asian
fonts.
Examples UDC↵
yields for example
001↵
1−972600−33,Base 3.33↵
UDC ↵
yields for example
004 ↵
1−972698−02,Cardfirm 02↵
1−972601−01,Base 4.01↵
1−972699−01,Bootfirm 01↵
1−972697−33,Intfont 01↵