Intermec EasyCoder C4 Reference Manual

Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual 87
Chapter 7—Commands
P – Print
Description This command is used to print the contents of the image buffer.
Syntax Pp
1
[,p
2
]
Parameters p
1
Numbers of label sets (1-65535).
p
2
Number of copies of each label (1-65535). Used in combination with counters
to print multiple copies of the same label.
Remarks Important!
The P command cannot be used inside a stored form sequence.
For automatic printing of stored forms, use the PA command.
Examples P↵ :Prints one label set
P1↵ :Prints one label set
P2,1↵ :Prints two label sets of one label each
P5,2↵ :Prints five label sets of two labels each
The principles for how counters are printed is illustrated by this
example, where the print command is P2,2:
Counter: 1
Label No. 1
Counter: 1
Label No. 2
Counter: 2
Label No. 3
Counter: 2
Label No. 4

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English