Intermec EasyCoder C4 - Requirements

44 Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual
Chapter 7—Commands
b – Datamatrix
Description The following Datamatrix specifi c options should append the
general part of the two-dimensional code command (see b
command, general part).
Syntax [P
4
,"DATA"]
Parameters P
4
Narrow bar from 1 to 15.
"DATA" Represents a fi xed data fi eld, maximum 125 characters long.
Example N ↵
b40,80,D,5,"123456789012345678901234567890→
→1234567890123456789012345678901234567890→
→12345678901234567890" ↵
P1 ↵