Intermec EasyCoder C4 Reference Manual

60 Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual
Chapter 7—Commands
FE – End Store Command
Description This command is used to end a Form Store sequence.
Syntax FE
Remarks The Form Store sequence is started with the FS command and
ended with the FE command.
Example FS"formname"↵ :Starts Form Store
.....
FE↵ :Ends Form Store

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English