Intermec EasyCoder C4 Reference Manual

10 Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual
Chapter 2—Commands List
Direct Mode
Setup Commands
Used to set up the printer globally, that is, affect both the Direct Mode
and Forms.
D Density ...............................................................................................49
eR User-Defi ned Error/Status Character Control...................................57
f Cut Position........................................................................................59
I Character Set Selection.......................................................................71
i Asian Character Spacing.....................................................................72
JB Disable Top of Form Backup .............................................................73
JF Enable Top of Form Backup ..............................................................74
j Media Feed Adjustment.....................................................................75
M Memory Allocation ............................................................................80
O Options Select ....................................................................................84
oR Character Substitution .......................................................................86
Q Set Form Length.................................................................................89
q Set Label Width..................................................................................93
R Set Reference Point.............................................................................94
S Speed Select ........................................................................................95
UC Command Reply Accept Character Control .....................................97
UN Disable Error Reporting.................................................................. 104
US Enable Error Reporting................................................................... 106
W Windows Mode............................................................................... 110
Y Serial Port Setup .............................................................................. 112
Z Print Direction ................................................................................ 113
Store Commands
Used to store graphic fi les.
GM Store Graphics in Memory.................................................................68
GW Store Graphics in Image Buffer..........................................................70
Used to store soft fonts.
ES Store Soft Font....................................................................................54
Clear and Delete Commands
Used to erase data from the printer's memory.
EK Delete Soft Font .................................................................................53
FK Delete Form .......................................................................................62
GK Delete Graphics..................................................................................67
N Clear Image Buffer .............................................................................83
^@ Reset Printer .................................................................................... 115

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English