Intermec EasyCoder C4 - UF Form Information Inquiry

100 Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual
Chapter 7—Commands
UF – Form Information Inquiry
Description This command will cause the printer to send information about
forms currently stored in the printer back to the host.
Syntax UF
Remarks The printer will send the number of forms stored and the name
of each form to the host through the RS-232 or USB port.
The UF command will be executed directly, without appending
any Linefeed.
Example UF :Returns number of forms and all form names,
for example:
UF006
TEST1
TEST2
TEST3
TEST4
TEST5
TEST6