Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual 107
Chapter 7—Commands
UV – Product Identity and Asian Font Types
Description This command generates an output on the RS-232 or USB port
about the software and font products stored in the EasyCoder
C4’s memory cartridge.
Syntax UV
Remarks The fi rst line returned after the UV command is the base
software appended by a CR/LF. Then comes one line with
information on the font appended by CR/LF.
Example UV
returns for example...
"1-972640-00,Base 4.00" Base software
"1-972550-00,Font GB2312-80" Chinese font
GB 2312-80 or...
"1-972640-00,Base 4.00" Base software
"1-972651-01,Font BIG5" Chinese Big5 level 1 & 2
font or...
"1-972640-00,Base 4.00" Base software
"1-972652-00,Font KSX1001:1992" Korean font
KS X 1001:1992 or...
"1-972640-00,Base 4.00" Base software
"1-972653-00,Font JISX0208:1997" Japanese font
JIS 0208:1997
To Next Page
Loading...
Need help?
General