Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual 117
Chapter 7—Commands
^ee – Immediate Error Report, cont.
Example
Serial
command
Manual
action
Reply on RS232 Comments
US↵
<ACK> Enable Error Reporting
AA↵
(Nothing happens)
Command with syntax error
(01)
Open cover <NAK>11<XOFF> Manual action to generate error
(11) and wait in position of
error-waiting-recovering.
UV↵
(Nothing happens)
Command to print product ID
will be queued
^ee↵
01,11<CR><LF> Command reports direct all
errors/status
Close cover <XON>1-972600-33,→
→Base 3.33<CR><LF>
Manual action to release error
11. Command UV will now be
performed.
P↵
<NAK>01<XOFF> Command to print, reports
syntax error (01)
Press
FEED key
<XON> Manual action to release error
status