24 Intermec EasyCoder ESim v4.00—Programmer’s Reference Manual
Chapter 5—Editing in Form Edit Mode
Complete List of the Example
Command Explanation
↵
CR/LF to start command structure
FK"TEST"↵
Delete current form named TEST
FS"TEST"↵
Start store form named TEST
V00,15,N,"Enter Product name:"↵
Defi ne 1:st variable
V01,10,L,"Enter Model number:"↵
Defi ne 2:nd variable
V02,8,N,"Checked by:"↵
Defi ne 3:rd variable
C0,6,L,+1,"Enter Serial Number:"↵
Defi ne counter
X0,0,4,752,584↵
Draw a box
LO0,144,752,4↵
Draw a line
LO440,232,4,160↵
Draw a line
A40,400,1,1,1,1,N,"Made in Sweden"↵
Write a 90˚ text line of fi xed data
A24,160,0,5,1,1,R,V00↵
Write 1:st variable text fi eld
A24,250,0,4,1,1,N,"MODEL: "V01↵
Write text line, fi xed data + 2:nd variable
A472,312,0,4,1,1,N,"Checked by: "V02↵
Write text, fi xed data + 3:rd variable
A24,312,0,4,1,1,N,"SERIAL#: "C 0↵
Write text line, fi xed data + 1:st counter
B280,440,0,1,2,3,96,B,"S"C 0↵
Write barcode, fi xed data + 1:st counter
GG24,12,"LOGO"↵
Write graphic from graphics memory
FE↵
Closing command to store form
To Next Page
Loading...
