Intermec EasyCoder C4 - Media Specifications

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 34
Chapter 7 Commands
Description The following MaxiCode specifi c options should append the general part of the
two-dimensional code command (see b command, general part).
Syntax ["CL,CO,PC,LPM"]
Parameters CL Class Code (3 digit number).
CO Country Code (3 digit number).
PC Postal Code:
U.S.A. (5 digits, 4 digits). Note the separating comma sign!
International (6 alphanumeric characters).
LPM Low Priority Message (up to 84 alphanumeric characters).
Example N ↵
b100,100,M,"300,400,93065,1692,This is MaxiCode" ↵
P1 ↵
b – MaxiCode