Intermec EasyCoder C4 - Requirements

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 49
Chapter 7 Commands
Description This command is used to delete a specifi ed form or all forms from memory.
Syntax FK "name" | "*"
Parameters "name" By entering a name of a form, that form only will be deleted from memory.
"*" By entering an asterisk (*) as wildcard, all forms will be deleted from memory.
Examples FK"FORM1" ↵ :Deletes “FORM1”
FK "*" ↵ :Deletes all forms
FK – Delete Form