Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 20 20
Chapter 6
Retrieving and Printing a Form
Example
Retrieve and Print Form
The form “TEST”, edited in the previous chapter, can be retrieved and
printed from any ASCII sending device using this sequence:
In this example we have manually substituted variables for testing
purposes.
Note: It is critical to the syntax to send exactly the same number of
variable lines as defi ned for this label form.
Command Explanation
↵ CR/LF to start command structure
FR"TEST"↵ Retrieve form
?↵ Call for variables
EASYCODER↵ Substitute variable V00
501SA↵ Substitute variable V01
Dan↵ Substitute variable V02
100000↵ Counter start value C0
P1,2 Print 2 copies of a single label
To Next Page
Loading...
