Intermec EasyCoder C4 - EK Delete Soft Font

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 43
Chapter 7 Commands
Description This command is used to delete soft fonts from memory.
Syntax EK ["name"|"*"]
Remarks Soft fonts are stored using the ES command and listed using the EI command.
Soft fonts can also be deleted from the printer using for example Intermec
LabelShop or Intermec InterDriver.
Example EK"a" ↵ :Deletes font "a"
EK"*" ↵ :Deletes all soft fonts
EK – Delete Soft Font