Intermec EasyCoder C4 Programmer's Guide

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 53
Chapter 7 Commands
Description This command will cause the printer to print a list of all graphics stored in
memory.
Syntax GI
Remarks The GI command will be executed directly, without appending any Linefeed.
Hint:
Issue a GI command after having stored a graphic to make sure the storing was
successful and to check the amount of free graphic memory.
Example GI :Prints graphics list
GI – Print Graphics Information

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English