Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 37
Chapter 7 Commands
Description
The following Datamatrix specifi c options should append the general part of the
two-dimensional code command (see b command, general part).
Syntax
[P
4
,"DATA"]
Parameters P
4
Narrow bar from 115.
DATA Represents a fi xed data fi eld.
Remarks
Datamatrix is a two-dimensional bar code that can store from 1 to about 2,000
characters. The symbology is square and can range from 0.001 inch per side
up to 4 inches per side.
Example
N ↵
b40,80,D,5,"123456789012345678901234567890
12345678901234567890123456789012345678901234567890
1234567890" ↵
P1 ↵
b – Datamatrix
To Next Page
Loading...
