Intermec EasyCoder C4 Programmer's Guide

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 36
Chapter 7 Commands
b – PDF417, cont.
Remarks If parameter www (max. print width) gives less space than required by the
sum of parameters x- (module width) and l- (max. column count), error
condition 50 will occur.
Likewise, if parameter hhh (max. print height) gives less space than required
by the sum of parameters y- (set bar height) and r- (max. row count), error
condition 50 will also occur.
Example ↵
N ↵
b40,40,P,400,300,p40,340,20,f1,x3,y10,r60,l5, →
→ "ABCDEFGHIJK1234567890abcdefghijk" ↵
P1 ↵
Note that the last parameter in the b command above (l5) is lowercase L + 5, not 15!

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English