Intermec EasyCoder C4 Programmer's Guide

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 84
Chapter 7 Commands
Description This command will cause the printer to send information about forms currently
stored in the printer back to the host.
Syntax UF
Remarks The printer will send the number of forms stored and the name of each form to the
host through the serial RS-232 port.
The UF command will be executed directly, without appending any Linefeed.
Example UF :Returns number of forms and all form names, for example:
UF006
TEST1
TEST2
TEST3
TEST4
TEST5
TEST6
UF – Form Information Inquiry

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English