Intermec EasyCoder C4 Programmer's Guide

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 91
Chapter 7 Commands
Description This command generates an output on the serial port about the software and font
products stored in the EasyCoder C4’s memory cartridge.
Syntax UV
Remarks The fi rst line returned after the UV command is the base software appended
by a CR/LF. Then comes one line with information on the font appended
by CR/LF.
Example UV
returns for example...
"1-972620-20,Base D3.21" Base software
"1-972550-00,Font GB2312-80" Chinese font GB 2312-80
or...
"1-972620-20,Base D3.21" Base software
"1-972651-01,Font BIG5" Chinese Big5 level 1 & 2 font
or...
"1-972620-20,Base D3.21" Base software
"1-972652-00,Font KSX1001:1992" Korean font KS X 1001:1992
or...
"1-972620-20,Base D3.21" Base software
"1-972653-00,Font JISX0208:1997" Japanese font JIS 0208:1997
UV – Product Identity and Asian Font Types

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English