Intermec EasyCoder C4 Programmer's Guide

Intermec EasyCoder C4 – Programmer’s Guide Ed. 3 70
Chapter 7 Commands
Description This command is used to clear the image buffer before building a new image.
Syntax N
Remarks The N command is essential when printing labels in the Direct Mode. It is not
necessary to use an N command before printing a form. An N command must not
be used inside a form in the Form Edit Mode.
Example N ↵ :Clears image buffer
N – Clear Image Buffer

Intermec EasyCoder C4 Specifications

General

Brand	Intermec
Model	EasyCoder C4
Category	Printer
Language	English