Intermec SF61 User Manual

Chapter 4 — Troubleshooting and Maintaining the SF61B
SF61 Cordless Scanner User’s Guide 63
You are trying to
establish a Bluetooth
connection from a host
device to your SF61B,
but the host device
cannot find your
scanner.
Your SF61B may be switched off or connected to
another Bluetooth host, or there may be a
Bluetooth management problem on your host
device. Try one or more of the following (see
Chapter 2, Connecting the SF61B for details on
the different pairing / connection methods):
• press the scan button to power up your product
• disconnect your product if it is connected to
another host
• re-pair your product with your host device
• restart your host device (power down / power
up)
You established a
Bluetooth connection
with an Intermec
computer, and the
settings on your SF61B
were restored to their
default values.
When you first connect to an Intermec computer,
only SF61B settings common to the Intermec
computer’s internal scanner settings are changed
to the internal scanner’s default settings. Scan
configuration bar codes, or use Intermec Settings
on your Intermec computer to change your SF61B
settings.
You cannot use your
SF61B to change the
configuration settings
of an SD61 base station.
You must use an SF51 scanner or another
compatible product if you want to change the
settings of an SD61 base station.
Your scanner is
unresponsive or appears
to be locked.
Try to perform a hardware reset of your scanner
(see below, , in the present chapter).
A hardware reset will restart your scanner but it
will not reset your custom configuration settings.
Depending on the type of Bluetooth connection
you are using, your scanner will automatically
reconnect with your host device / application or
you will have to reconnect manually.
Problems and Possible Solutions (continued)
Problem Possible Solution

Intermec SF61 Specifications

General

Brand	Intermec
Model	SF61
Category	Barcode Reader
Language	English