INVT Goodrive 200 - Page 113

Goodrive200 inverters Function codes
112
Functio
n code
Name
Detailed instruction of parameters
Default
value
Modify
the
motor/inverte
r
G
motor:15
0%
P11.09
Overload
pre-alarm
test level
P
motor:12
0%
○
P11.10
Overload
pre-alarm
detection
time
overload pre-alarm will be output.
Setting range of P11.08:
Enable and define the overload pre-
alarm of the
inverter or the motor.
Setting range: 0x000~0x131
LED ones:
0:Overload pre-alarm of the motor, comply with th
e
rated current of the motor
1:Overload pre-alarm of the inverter, comply
with the
rated current of the inverter
LED tens:
0:The
inverter continues to work after underload
pre-alarm
1:The
inverter continues to work after underload
pre-alarm and the inver
ter stops to run after overload
fault
2: The
inverter continues to work after overload
pre-
alarm and the inverter stops to run after
underload fault
3. T
he inverter stops when overloading or
underloading.
LED hundreds :
0:Detection all the time
1:Detection in constant running
1.0s ○