INVT Goodrive 200 - Page 140

Goodrive200 inverters Basic operation instruction
139
Function
code
Name Detailed instruction of parameters
Default
value
P01.12
DC braking time
0.0~50.0s 0.0s
P01.13
Dead time of FWD/REV
rotation
0.0~3600.0s 0.0s
P01.14
Shifting between
FWD/REV rotation
0:Switch after 0 frequency
1:Switch after the starting frequency
0
P01.15 Stopping speed 0.00~100.00Hz 0.10 Hz
P01.18
Terminal
running protection when
powering on
0:The terminal running command is
invalid when powering on
1: The terminal running command is
valid when powering on
0
P01.19
The running frequency is
lower than the lower limit
one (valid if the lower limit
frequency is above 0)
0: Run at the lower-limit frequency
1: Stop
2: Hibernation
0
P01.20
Hibernation restore delay
time
0.0~3600.0s(valid when P01.15=2) 0.0s
P01.21 Restart after power off
0: Disable
1: Enable
0
P01.22
The waiting time of restart
after power off
0.0~3600.0s(valid when P01.17=1) 1.0s
P01.23 Start delay time 0.0~60.0s 0.0s
P01.24
Delay time of the stop
speed
0.0~100.0 s 0.05s
P05.01~P0
5.09
Digital input function
selection
1: Forward rotation operation
2: Reverse rotation operation
4: Forward rotation jogging
5: Reverse rotation jogging
6: Coast to stop
7: Fault reset
8: Operation pause
21:ACC/DEC time option１