INVT Goodrive 200 - Page 145

Goodrive200 inverters Basic operation instruction
144
Function
code
Name
Detailed instruction of parameters Default
value
P05.01~P0
5.09
Multi-function digital input
terminals
(S1~S8,HDI) function
selection
10:Increasing frequency setting(UP)
11:Decreasing frequency
setting(DOWN)
12:Cancel the frequency change setting
13:Shift between A setting and B setting
14:Shift between combination setting
and A setting
15:Shift between combination setting
and B setting
P08.42 Keypad data control
0x000~0x1223
LED ones:frequency enable selection
0:Both ∧ / ∨ keys and digital
potentiometer adjustments are effective
1:Only ∧ / ∨ keys adjustment
s is
effective
2:Only digital potentiometer adjustments
is effective
3:Neither ∧ / ∨ keys nor digital
potentiometer adjustments are effective
LED tens: frequency control selection
0:Only effective when P00.06=0 or
P00.07=0
1:Effective for all frequency setting
manner
2:Ineffective for multi-step speed when
multi-step speed has the priority
LED hundreds: action selection during
stopping
0:Setting is valid
1:Valid during running, cleared after
stopping
2:Valid during running, cleared after
0x0000