INVT Goodrive 200 - Page 165

Goodrive200 inverters Basic operation instruction
164
Function
code
Name Detailed instruction of parameters
Default
value
1: Open collector pole output
P06.01 Y output 0
P06.02 HDO output 0
P06.03 Relay RO1 output 1
P06.04 Relay RO2 output
0:Invalid
1:On operation
2:Forward rotation operation
3:Reverse rotation operation
4: Jogging operation
5:The inverter fault
6:FDT1
7:FDT2
8:Frequency arrival
9:Zero speed running
10:Upper limit frequency arrival
11:Lower limit frequency arrival
12:Ready for operation
13:Pre-magnetizing
14:Ooverload pre-alarm
15: Uunderload pre-alarm
16:Ccompletion of simple PLC step
17:Completion of simple PLC cycle
18:Setting count value arrival
19:Defined count value arrival
20:External fault valid
21:Length arrival
22:Running time arrival
23:MODBUS communication virtual
terminals output
24~26: Reserved
27: Auxiury motor 1 start
28: Auxiury motor 2 start
29~30: Reserved
5
P06.05
Polarity sele
ction of output
terminals
0x00~0x0F 0x00