INVT Goodrive 200 - Page 248

Goodrive200 inverters
Appendix C
247
and (-). Do not connect the braking unit with other terminals except for
(+) and (-). Damage to the inverter or braking circuit or fire may occur.
 Connect the braking resistor or braking unit with the inverter according
to the diagram. Incorrect wiring may cause damage to the inverter or
other devices.
Goodrive200 series inverters below 30kW (including 30kW) need internal braking units and
the inverters above 37kW need external braking unit. Please select the resistence and
power of the braking resistors according to actual utilization.
The cousumped power of the
braking resistor
Type
Braking unit
type
100% of
braking
rate
(Ω)
10%
braking
50%
braking
80%
braking
Mini
Braking
Resistor
(Ω)
GD200-1R5G-4 426.7
0.225 1.125 1.8 170
GD200-2R2G-4 290.9
0.33 1.65 2.64 130
GD200-004G/5R5P-4
160.0
0.6 3 4.8 80
GD200-5R5G/7R5P-4
116.4
0.75 4.125 6.6 60
GD200-7R5G/011P-4
85.3 1.125 5.625 9 47
GD200-011G/015P-4
58.2 1.65 8.25 13.2 31
GD200-015G/018P-4
42.7 2.25 11.25 18 23
GD200-018G/022P-4
35.6 3 13.5 21.6 19
GD200-022G/030P-4
29.1 3.75 16.5 26.4 17
GD200-030G/037P-4
Internal braking
unit
21.3 4.5 22.5 36 17
GD200-037G/045P-4
DBU100H-060-4
13.2 6 28 44 11.7
GD200-045G/055P-4
10.9 7 34 54
GD200-055G/075P-4
8.9 8 41 66
GD200-075G/090P-4
DBU100H-110-4
6.5 11 56 90
6.4
GD200-090G/110P-4
5.4 14 68 108
GD200-110G/132P-4
DBU100H-160-4
4.5 17 83 132
4.4
GD200-132G/160P-4
DBU100H-220-4
3.7 20 99 158 3.2
GD200-160G/185P-4
3.1 24 120 192
GD200-185G/200P-4
3.1 24 120 192
GD200-200G/220P-4
DBU100H-320-4
2.5 30 150 240
2.2
GD200-220G/250P-4
2.2 33 165 264
GD200-250G/280P-4
DBU100H-400-4
2.0 38 188 300
1.8
GD200-280G/315P-4
Two 3.6*2
21*2 105*2
168*2
2.2*2