INVT Goodrive 200 - Page 66

Goodrive200 inverters Function codes
65
Functio
n code
Name
Detailed instruction of parameters
Default
value
Modify
P03.28
Reserved
●
P03.29
Reserved
●
P04 Group V/F control
P04.00
Motor 1 V/F
curve setting
These function codes define the V/F
curve of
Goodrive200 motor 1
to meet the need of different
loads.
0:Straight line V/F curve；
applying to the constant
torque load
1:Multi-dots V/F curve
2:1.3
th
power low torque V/F curve
3:1.7
th
power low torque V/F curve
4:2.0
th
power low torque V/F curve
C
urves 2~4 apply to the torque loads such as fans
and water pumps. U
sers can adjust according to the
features of the loads to achieve a best energy-saving
effect.
5:Customized V/F(V/F separation)；On
this mode, V
can be separated
from f and f can be adjusted
through the frequency reference channel
set by
P00.06 or the voltage reference channel
set by
P04.27 to change the feature of the curve.
Note: V
b
in the below picture is the motor rated
voltage and f
b
is the motor rated frequency.
0 ◎
P04.01
Motor 1
Torque
boost to the output voltage for the features of
0.0%
○