26
Ioline FlexJet Service Manual
Control Center menu bar features
File
Download Firmware Allows the user to download the lat-
est rmware version for the FlexJet.
See the FlexJet User Guide for more
information.
Send Plot File Print a PLT or PLX le.
Exit Exit the Control Center.
Communications
Settings Select the COM port and baud rate
to match the printer.
Send Command Permits advanced users to manually
enter commands.
Tools
Cartridge Calibration Displays tools to adjust print
cartridge alignment. See the FlexJet
User Guide for more details.
Reset Machine ID Resets the machine serial number.
A unique key code, only available
from Ioline customer service, is re-
quired. It is usually only necessary
if the main logic board is changed.
Size Calibration Allows adjustment of the size cali-
bration settings. See the FlexJet User
Guide for more details.
Set Machine ID Stores the printer serial number in
permanent memory. This step is
required for upgrading the number
of active print cartridges in machines
pre-wired for expansion.
Set Key Code Sets the license key code to enable
inactive print heads in machines pre-
wired for expansion. It requires that
the serial number is stored in perma-
nent memory with the Set Machine
ID function described above.
Help
About Displays Control Center version
information.
To Next Page
Loading...
