4230 Flow Meter
Section 2 Programming
2-24
Select YES if you want DO/PH to appear in the report. You must
have the appropriate sensor connected to sense parameters; the
flow meter is capable of sensing temperature, pH and temper-
ature, and D.O. (dissolved oxygen) and temperature. The fol-
lowing will appear:
Select yes if you want TEMPERATURE to appear in the report.
Press Enter again and the display will return to the REPORT
SETUP menu:
FLOW METER HISTORY is just off the screen.
This time select YSI 600. The following display will appear:
Press Enter again and the display will return to the REPORT
SETUP menu.
This time select SAMPLE HISTORY. The following will appear:
Select YES if you want SAMPLE HISTORY to appear in the
report. Press Enter again and the display will return to the
REPORT SETUP menu:
This time, select FLOW METER HISTORY. The following will
appear:
Select YES if you want HISTORY to appear in the report.
HISTORY is a list of the changes that have been made to the flow
meter's program.
Press Exit to leave the program. Then press Enter and reselect
SETUP. The Setup menu will reappear:
TEMPERATURE IN REPORT
• YES • • NO •
REPORT SETUP
• FLOW • • DO/PH • • YSI 600 • • SAMPLE HISTORY •
YSI DATA IN REPORT
• YES • • NO •
REPORT SETUP
• FLOW • • DO/PH • • YSI 600 • • SAMPLE HISTORY •
SAMPLE HISTORY IN REPORT
• YES • • NO •
REPORT SETUP
• YSI 600 • • SAMPLE HISTORY • • FLOW METER HISTORY •
FLOW METER HISTORY IN REPORT
• YES • • NO •
SETUP OPTIONS: 'EXIT' TO QUIT
• STATUS • • REPORT SETUP • • LCD BACKLIGHT •
To Next Page
Loading...
