4230 Flow Meter
Section 2 Programming
2-43
called the mho (ohm spelled backwards), and that term is more
familiar to some. PPT is parts per thousand. Select the standard
most suitable for your application.
Then:
Then:
If you select PPT for the conductivity standard:
Then:
Then:
There is no need to calibrate the YSI 600 temperature sensor, as
it is self-calibrating. See Figure 2-4 for a YSI calibration flow
chart.
CONDUCTIVITY STANDARD
X.XX MS/CM
PLACE PROBE IN X.XX MS/CM
PRESS ENTER WHEN STABLE: X.XX MS/CM
CALIBRATING...
PLEASE WAIT...
CONDUCTIVITY STANDARD
X.XX PPT
PLACE PROBE IN X.XX PPT
PRESS ENTER WHEN STABLE: X.XX MS/CM
CALIBRATING...
PLEASE WAIT...
To Next Page
Loading...
