VT50 – Operation
5.3.1 App toggling
Proceed as follows to specify the apps between which it will be possible to switch
by pressing the toggle button:
1. To do so, press on the button of the app in question on the touchscreen or
turn the scroll wheel until the button is highlighted in white and then press on
the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the Boolean value.
3. Confirm your entry with "OK".
5.3.2 Free button assignment
A choice of free button assignment can be made so that it is possible to choose
which app you can access directly via the i button.
To assign the i button, proceed as follows:
1. Press on the "Free button assignment" button on the touchscreen or turn the
scroll wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A selection list opens.
2. Select the desired setting from the list. To do so, press the button with the
lighting mode.
3. Confirm your selection by pressing "OK" or pressing the button with the
lighting mode again or by pressing the scroll wheel.
5.3.3 Activating/deactivating button selection by scroll wheel (
Comfort)
To activate/deactivate button selection by scroll wheel, proceed as follows:
1. Press on the "Button selection by scroll wheel" button on the touchscreen or
turn the scroll wheel until the button is highlighted in white and then press on
the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the Boolean value.
3. Confirm your entry with "OK".
Note
This setting only acts on the machine operation.
27
To Next Page
Loading...