VT50 – Operation
5.3.4.1 Enter Day lighting
To enter the desired display brightness for daytime operation, proceed as follows:
1. Press on the "Day lighting" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the value on the touchscreen using the digit field or the slider.
3. Confirm your entry with "OK".
Note
The value for the Display lighting is given as a percentage and can be adjusted in
steps of 10%.
5.3.4.2 Enter Night lighting
To enter the desired display brightness for night-time operation, proceed as
follows:
1. Press on the "Night lighting" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the value on the touchscreen using the digit field or the slider.
3. Confirm your entry with "OK".
Note
The value for the Display lighting is given as a percentage and can be adjusted in
steps of 10%.
29
To Next Page
Loading...