isobus VT50 - Page 35

VT50 – Operation
5.3.6.1 Select language
To select the language, proceed as follows:
1. Press on the "Language" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
 A selection list opens.
2. Select the desired setting from the list. To do so, press the button with the
language.
3. Confirm your selection by pressing "OK" or pressing the button again or by
pressing the scroll wheel.
5.3.6.2 Select keyboard
To select a keyboard proceed as follows:
1. Press on the "Keyboard" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
 A selection list opens.
2. Select the desired setting from the list. To do so, press the button with the
country.
3. Confirm your selection by pressing "OK" or pressing the button again or by
pressing the scroll wheel.
5.3.6.3 Select units
To select the system of units proceed as follows:
1. Press on the "Units" button on the touchscreen or turn the scroll wheel until
the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
 A selection list opens.
2. Select the desired setting from the list. To do so, press the button with the
system of units.
3. Confirm your selection by pressing "OK" or pressing the button again or by
pressing the scroll wheel.
34