VT50 – Operation
5.3.6.4 Select decimal symbol
To select the decimal symbol proceed as follows:
1. Press on the "Decimal symbol" button on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
A selection list opens.
2. Select the desired setting from the list. To do so, press the button with the
decimal symbol.
3. Confirm your selection by pressing "OK" or pressing the button again or by
pressing the scroll wheel.
35
To Next Page
Loading...