isobus VT50 - Page 54

VT50 – Operation
5.3.8.4.1 Show RAM
To display the RAM, proceed as follows:
1. Press on the "RAM" button on the touchscreen or turn the scroll wheel until
the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
 A mask opens with information about RAM capacity and usage.
5.3.8.4.2 Show internal storage
To display the internal storage, proceed as follows:
1. Press on the "Internal storage" button on the touchscreen or turn the scroll
wheel until the button is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
 A mask opens with information about the capacity and usage of the
internal memory.
5.3.8.4.3 Flash drive status
To display the flash drive status, proceed as follows:
1. Press on the "Flash drive" button on the touchscreen or turn the scroll wheel
until the button is highlighted in white and then press on the scroll wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
 A mask opens with information about flash drive capacity and usage.
Note
This function is only available if a flash drive is inserted.
53