isobus VT50 - Page 93

CCI.Cam –
4.4.4.1 Activate/deactivate camera images for automatic mode
To activate/deactivate the individual camera images for automatic mode, proceed
as follows:
1. Press on the "Camera 1-8" button on the touchscreen or turn the scroll wheel
until the button in question is highlighted in white and then press on the scroll
wheel.
Once the button is highlighted you can, alternatively, also press the "OK" (F6)
button.
2. Enter the Boolean value.
3. Confirm your entry with "OK".
Note
In automatic mode, changing between the activated camera images takes place
automatically.
Pos: 11 /C C-Is ob us/P robl e mbe hebu ng @ 8\ mod_1274441518516_6.doc @ 121418 @ 122334444442
Note
To be able to activate the camera images for automatic camera switching, an
allocation of cameras to function keys is required (see chapter 4.4.3).
18