Fig. Enabled dynamic
allocation (dYn IP)
of the TCP / IP address
Fig. Gateway (GAt),
byte 0, value 192
Fig. Subnet mask (Sub),
byte 0, value 255
Fig. Disabled
dynamic allocation (dYn IP)
of the TCP / IP address
m
Caution!
Connection of the UMG96RM-E to the
Ethernet may only be carried out after
discussion with the network administrator!
m
Caution!
The UMG 96RM-E is factory-programmed
for the dynamic allocation of the IP settings
(DHCP mode).
Settings can be changed as described
in TCP/IP Configuration or, for example,
via an appropriate Ethernet connection
by means of GridVis software.
To Next Page
Loading...
