101
Saving a Pattern Combination
The pattern combination and monogram can be saved
as a le in the machine’s internal memory or a USB ash
drive.
The machine has a USB port for USB ash drives.
Press the function switch key.
Press the save le key after programming a pattern
combination, and the save le window will open.
(1) Function switch key
(2) Save le key
Select the location to where you wish to save the pattern
combination.
The “Ordf” folder is shown and the le name is assigned
automatically starting from C_001.....in order.
Select the “Ordf” folder.
Press the OK key to save the le under the assigned
name.
(3) File name
If you wish to assign a unique name to the le, press the
rename key and the keyboard window will open.
(4) Rename key
(1)
(3)
(4)
NOTE:
• The les and folders are displayed on different
pages. Press page keys to switch the window.
• This model supports FAT16 and FAT32 formats only.
If the USB ash drive is not read, check its format
(refer to pages 153-154).
• Do not use a USB card reader and USB hub.
If you wish to use a QWERTY layout keyboard, press the
keyboard key.
Press the upper or lower case key to select letter case.
(6) Upper case key
(7) Lower case key
(8) Keyboard key
Enter a new name and press the OK key to change the
le name.
Press the OK key and the le is saved under the new
name.
(2)
(6) (7) (8)
(5)
(5) Page keys
To Next Page
Loading...
